1 kattha is equal to 3645 square feet, or about 338.63 square metres. One kattha has 20 dhur, and 20 kattha make 1 bigha.
This is the land measuring system used across the Terai, from Jhapa to Kanchanpur. Below you will find how the numbers are built, a table that converts bigha, kattha and dhur to sq ft, m² and ropani, and a worked example.
Bigha, kattha and dhur in square feet
- 1 bigha = 20 kattha = 72,900 sq ft
- 1 kattha = 20 dhur = 3645 sq ft
- 1 dhur = 182.25 sq ft
The neat way to remember this: a bigha is a square 270 ft by 270 ft (270 × 270 = 72,900). A dhur is a square 13.5 ft by 13.5 ft (13.5 × 13.5 = 182.25). A kattha is not a whole-number square, but it fits as a rectangle of 67.5 ft by 54 ft, which gives 3645 sq ft.
To change square feet into square metres, multiply by 0.09290304. So 1 kattha = 3645 × 0.09290304 = 338.63 m².
Kattha conversion table
| Area | Square feet | Square metres | Ropani |
|---|---|---|---|
| 1 dhur | 182.25 | 16.93 | 0.033 |
| 5 dhur | 911.25 | 84.66 | 0.166 |
| 10 dhur | 1822.5 | 169.32 | 0.333 |
| 1 kattha | 3645 | 338.63 | 0.666 |
| 2 kattha | 7290 | 677.26 | 1.331 |
| 5 kattha | 18,225 | 1693.16 | 3.328 |
| 10 kattha | 36,450 | 3386.32 | 6.656 |
| 1 bigha | 72,900 | 6772.63 | 13.313 |
Ropani values are found by dividing square feet by 5476. One kattha is also about 10.65 aana.
Worked example
A plot in Birgunj is listed as 2 bigha, 5 kattha and 10 dhur.
2 × 72,900 = 145,800 sq ft. 5 × 3645 = 18,225 sq ft. 10 × 182.25 = 1822.5 sq ft. Total = 165,847.5 sq ft, which is 15,407.74 m² or about 30.29 ropani.
The Jagga Napi land area converter does these steps for you in both systems. For hectares, acres or other units, the engineering unit converter helps.
Converting square metres back to bigha, kattha and dhur
A survey trace or a measurement by an engineer often gives the area in square metres, while buyers and sellers in the Terai still talk in kattha and dhur. Work it in three steps:
- Change m2 to square feet: divide by 0.09290304 (or multiply by 10.7639).
- Take out whole bigha (72,900 sq ft each), then whole kattha (3,645 sq ft each).
- Divide what is left by 182.25 to get dhur.
Example: a trace shows 500 m2. 500 / 0.09290304 = 5,381.96 sq ft. That is less than a bigha, so take one kattha: 5,381.96 minus 3,645 = 1,736.96 sq ft. 1,736.96 / 182.25 = 9.53 dhur. The plot is 1 kattha 9.53 dhur, often written 0-1-9.53 (bigha-kattha-dhur).
Common Terai plot sizes
Many town plots in the Terai are sold by frontage and depth in feet. For a rectangle, area = frontage x depth, then divide by 182.25 for dhur.
| Plot (ft) | Area (sq ft) | Dhur | Kattha-dhur | m2 | Aana |
|---|---|---|---|---|---|
| 30 x 60 | 1,800 | 9.88 | 0-9.88 | 167.23 | 5.26 |
| 40 x 60 | 2,400 | 13.17 | 0-13.17 | 222.97 | 7.01 |
| 35 x 70 | 2,450 | 13.44 | 0-13.44 | 227.61 | 7.16 |
| 45 x 81 | 3,645 | 20.00 | 1-0 | 338.63 | 10.65 |
| 50 x 80 | 4,000 | 21.95 | 1-1.95 | 371.61 | 11.69 |
| 60 x 100 | 6,000 | 32.92 | 1-12.92 | 557.42 | 17.53 |
Aana is the hill unit (1 aana = 342.25 sq ft), shown so that buyers who think in ropani and aana can compare. A 45 x 81 ft plot is exactly 1 kattha, a handy size to remember.
Worked example: price per kattha to price per dhur
Suppose land on a road in Birgunj is offered at Rs 40 lakh per kattha (an example figure, not a market rate). Per dhur that is 40,00,000 / 20 = Rs 2,00,000. Per square foot it is 40,00,000 / 3,645 = Rs 1,097.39.
A 40 x 60 ft plot is 13.17 dhur, so it costs 13.17 x 2,00,000 = about Rs 26.34 lakh. If the seller rounds the area up to 14 dhur, the price becomes Rs 28 lakh, Rs 1.66 lakh more for land that does not exist. Always agree the area to two decimals of a dhur, or in square feet, before agreeing the price.
Kattha and ropani side by side
Families who move between the hills and the Terai often need both systems. 5 kattha = 18,225 sq ft = 18,225 / 5,476 = 3.328 ropani. The 0.328 ropani is 0.328 x 16 = 5.25 aana, so 5 kattha is about 3 ropani 5.25 aana. Going the other way, 1 ropani (5,476 sq ft) is 1 kattha and 10.05 dhur. The 1 ropani guide has the full ropani-aana-paisa-daam table.
Common mistakes
- Using an Indian kattha converter. In parts of India a kattha or a bigha is a different size and changes from state to state. In Nepal 1 kattha is fixed at 3,645 sq ft.
- Multiplying frontage by depth for a plot that is not a rectangle. If the sides are not parallel, measure all four sides and one diagonal and use the plot area calculator, which splits the plot into two triangles.
- Measuring along a slope or round a curve. Land area is the horizontal (plan) area. Tape the plot level, or use the surveyor's figures.
- Rounding dhur too early. Keep two decimals until the last step, then round once.
- Trusting the broker's figure over the record. The lalpurja and the trace from the survey office decide the legal area. Compare your own measurement with them before you pay, and ask the land survey office (Napi) if they differ. The Survey Department lists the offices.
More questions
How do I write bigha, kattha and dhur in short form?
Usually as three numbers joined by dashes in that order, for example 2-5-10 for 2 bigha 5 kattha 10 dhur. Check the order on your document, since hill land uses ropani-aana-paisa-daam in the same short form.
How many square feet is 10 dhur?
10 x 182.25 = 1,822.5 sq ft, or 169.32 m2, which is half a kattha.
Frequently asked questions
How many dhur are in 1 kattha?
There are 20 dhur in 1 kattha, and 400 dhur in 1 bigha.
Is 1 kattha bigger than 1 ropani?
No. 1 kattha (3645 sq ft) is about two thirds of a ropani (5476 sq ft). Put the other way, 1 ropani is about 1.5 kattha.
How many hectares is 1 bigha?
1 bigha is 6772.63 m², which is about 0.677 hectare. For any land deal, go by the figures on the lalpurja and the survey office record.
Comments
Post a Comment